Exotic Searches

The experimental information on the search for non $q \bar q$ mesons as glueballs, hybrids and multiquark states is reviewed. Candidate states which are particularly amenable to detailed study by accumulating large samples of $J/\psi$, $\eta_c$, $\chi$ decays at a $\tau$-charm factory are discussed.Comment: 25 pages, LaTex, 22 Figures (available from the authors on request), BARI-TH/94-17

Modeling, simulation, and control of an extraterrestrial oxygen production plant

The immediate objective is the development of a new methodology for simulation of process plants used to produce oxygen and/or other useful materials from local planetary resources. Computer communication, artificial intelligence, smart sensors, and distributed control algorithms are being developed and implemented so that the simulation or an actual plant can be controlled from a remote location. The ultimate result of this research will provide the capability for teleoperation of such process plants which may be located on Mars, Luna, an asteroid, or other objects in space. A very useful near-term result will be the creation of an interactive design tool, which can be used to create and optimize the process/plant design and the control strategy. This will also provide a vivid, graphic demonstration mechanism to convey the results of other researchers to the sponsor

Some comments on nˉp\bar n p-annihilation branching ratios into ππ\pi \pi-, KˉK\bar K K- and πη\pi \eta-channels

We give some remarks on the $\bar n p$-partial branching ratios in flight at low momenta of antineutron, measured by OBELIX collaboration. The comparison is made to the known branching ratios from the $p \bar p$-atomic states. The branching ratio for the reaction $\bar n p \to \pi^+\pi^0$ is found to be suppressed in comparison to what follows from the $p \bar p$-data. It is also shown, that there is no so called dynamic I=0-amplitude suppression for the process $N\bar N \to K\bar K$.Comment: 8 pages, LaTeX, no figure

High density culturing of porcine hepatocytes immobilized on nonwoven polyurethane-based biomatrices

Objective: Hepatocytes are increasingly used as functional units in bioartificial liver devices. The objective of the present study was to investigate the feasibility of culturing porcine hepatocytes in high density on a novel polyurethane-based nonwoven three-dimensional matrix. We investigated (1) the optimal cell density within this culture configuration, (2) the maintenance of liver-specific morphology and cell functions over long-term periods and (3) the necessity to apply an additional extracellular matrix component (collagen gel). Methods: Nonwoven polyurethane matrices were manufactured by a specially developed fiber extrusion technology. Pig hepatocytes were cultured at various cell densities of 0.1, 0.25, 0.5, 0.75, 1 and 2 x 10(6) cells/cm(2) on three-dimensional networks of nonwoven polyurethane matrices and cell adhesion as well as functional parameters (DNA of nonattached/attached cells, lactate dehydrogenase release and cytochrome P450 activity) were determined. To assess the performance of cells within this configuration albumin and urea excretion was measured over 8 days. The potentially beneficial effect of an additional extracellular matrix configuration was evaluated by comparing the average albumin synthesis in groups of identical cell numbers. Results: The optimal cell density in this three-dimensional culture configuration was 1 x 10(6) cells/cm(2). The functional capacity of hepatocytes was stable for 8 days at an average level of 53.7 +/- 5.6 ng/h/mug DNA and of 1.8 +/- 0.14 mug/h/mug DNA for albumin and urea excretion, respectively. The supplementation of an extracellular matrix configuration did not improve functional activity of cells. Average albumin synthesis was 35.6 ng/h/mug DNA (28.7, 42.8) and 32.7 ng/h/mug DNA (23.4, 49.2) for collagen-immobilized and control cultures, respectively, Conclusion: The results of the study indicate that nonwoven polyurethane sheets supply a biocompatible support structure for functionally active high density cultures. Thus, nonwoven polyurethane matrices should be further investigated on with respect to their role in the development, optimization and design of bioartificial liver systems. Copyright (C) 2001 S.Karger AG, Basel

Development of the cryogenic system of AEgIS at CERN

The AEgIS (Antimatter Experiment: Gravity, Interferometry, Spectroscopy) experiment is located at the antiproton decelerator complex of CERN. The main goal of the experiment is to perform the first direct measurement of the Earth’s gravitational acceleration on antihydrogen atoms within 1% precision. The antihydrogen is produced in a cylindrical Penning trap by combining antiprotons with positrons. To reach the precision of 1%, the antihydrogen has to be cooled to 100 mK to reduce its random velocity. A dilution refrigerator is selected to deliver the necessary cooling capacity of 100 μW at 50 mK. The AEgIS cryogenic system basically consists of cryostats for a 1-T and for a 5-T superconducting magnet, a central region cryostat, a dilution refrigerator cryostat and a measurement cryostat with a Moiré deflectometer to measure the gravitational acceleration. In autumn 2012, the 1-T cryostat, 5-T cryostat and central region cryostat were assembled and commissioned. The apparatus is cooled down in eight days using 2500 L of liquid helium and liquid nitrogen. During operation, the average consumption of liquid helium is 150 L∙day-1 and of liquid nitrogen 5 L·day-1. The temperature sensors at the Penning traps measured 12 K to 18 K, which is higher than expected. Simulations show that this is caused by a bad thermalization of the trap wiring. The implementation of the sub-kelvin region is foreseen for mid-2015. The antihydrogen will be cooled down to 100 mK in an ultra-cold trap consisting of multiple high-voltage electrodes made of sapphire with gold plated electrode sectors

Evidence For The Production Of Slow Antiprotonic Hydrogen In Vacuum

We present evidence showing how antiprotonic hydrogen, the quasistable antiproton-proton (pbar-p) bound system, has been synthesized following the interaction of antiprotons with the hydrogen molecular ion (H2+) in a nested Penning trap environment. From a careful analysis of the spatial distributions of antiproton annihilation events, evidence is presented for antiprotonic hydrogen production with sub-eV kinetic energies in states around n=70, and with low angular momenta. The slow antiprotonic hydrogen may be studied using laser spectroscopic techniques.Comment: 5 pages with 4 figures. Published as Phys. Rev. Letters 97, 153401 (2006), in slightly different for

Three Dimensional Annihilation Imaging of Antiprotons in a Penning Trap

We demonstrate three-dimensional annihilation imaging of antiprotons trapped in a Penning trap. Exploiting unusual feature of antiparticles, we investigate a previously unexplored regime in particle transport; the proximity of the trap wall. Particle loss on the wall, the final step of radial transport, is observed to be highly non-uniform, both radially and azimuthally. These observations have considerable implications for the production and detection of antihydrogen atoms.Comment: Invited Talk at NNP03, Workshop on Non-Neutral Plasmas, 200

Systematization of tensor mesons and the determination of the 2++2^{++} glueball

It is shown that new data on the $(J^{PC}=2^{++})$-resonances in the mass range $M\sim1700-2400$MeV support the linearity of the $(n,M^2)$-trajectories, where $n$ is the radial quantum number of quark--antiquark state. In this way all vacancies for the isoscalar tensor $q\bar q$-mesons in the range up to 2450 MeV are filled in. This allows one to fix the broad $f_2$-state with $M=2000\pm30$MeV and $\Gamma=530\pm40$MeV as the lowest tensor glueball. PACS numbers: 14.40.-n, 12.38.-t, 12.39.-MkComment: 10 pages, 1 figur

Detection of antihydrogen annihilations with a Si-micro-strip and pure CsI detector

In 2002, the ATHENA collaboration reported the creation and detection of cold (~15 K) antihydrogen atoms [1]. The observation was based on the complete reconstruction of antihydrogen annihilations, simultaneous and spatially correlated annihilations of an antiproton and a positron. Annihilation byproducts are measured with a cylindrically symmetric detector system consisting of two layers of double sided Si-micro-strip modules that are surrounded by 16 rows of 12 pure CsI crystals (13 x 17.5 x 17 mm^3). This paper gives a brief overview of the experiment, the detector system, and event reconstruction. Reference 1. M. Amoretti et al., Nature 419, 456 (2002).Comment: 7 pages, 5 figures; Proceedings for the 8th ICATPP Conference on Astroparticle, Particle, Space Physics, Detectors and Medical Physics Applications (Como, Italy October 2003) to be published by World Scientific (style file included